 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Linear Amplifier MMIC Data Sheet - Rev 1 ADA10000S3C FEATURES * * * * High Linearity (IIP3 + 15 dBm) Low Noise Figure (2.0 dB) Single Supply (+8Vdc) Wide Bandwidth (50 MHz - 1 GHz) S3C 16 Pin SOIC Package Description The ADA10000 is a monolithic IC intended for use in applications requiring high linearity such as: Cellular Telephone Base Station Driver Amplifiers, CATV Fiber Receiver/Distribution Amplifiers and CATV Drop Amplifiers. Supplied in a surface mount, 16 lead-SOIC package, it is well suited for use in amplifiers where small size, reduced component count, and high reliability are important. PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FUNC TION GND GND GND GND GND RFIN GND GND GND GND GND GND GND RFOUT GND GND External Test Circuit 1000 pF RF OUT ADA10000 3.9 H 1000 pF 5.6 nH 0.1 f RFIN ADA10000S3C Absolute Maximum Ratings PAR AMETER VDD/VRFOUT VRFIN RFIN Storage Temperature Solderi ng Temperature Solderi ng Ti me Thermal Resi stance MIN 0 -65 MAX 12 0 +10 +150 260 5.0 35 0 U N ITS VD C VD C dB m 0 0 C C S e c. C /W Operating Ranges PAR AMETER V DD IDD C ase Temperature MIN 4 50 -40 TYP 8 1 MAX 9 150 85* U N IT Volts mA 0 - C * Median time to failure degraded above this temperature Electrical Specifications (TA = +25 C, RF = 50 to 1000 MHz, Test System = 75W, VDD = + 8VDC) PAR AMETER C SO /C SO 2 4 MIN 60/62 65/74 14 +29 +13 TYP 15 2.0 +34 +15 MAX 3.5 - U N ITS dB c dB c dB dB dB m dB m C TB2/C TB4 Gai n Noi se Fi gure 2nd Order Input Intercept Poi nt (IIP2)3 3rd Order Input Intercept Poi nt (IIP3)3 1. The device can be operated at + 6 VDC for lower power dissipation; Refer to the figures on page for performance variation with supply voltage. 2. 160 channels, + 17 dBmV per channel, (measured at the output) 6 MHz channel spacing. 3. Two tones, - 10 dBm per tone at input. 4. 80 channels, + 19 dBmV per channel @ output, 6 MHz channel spacing. 2 ADA10000S3C Gain and Noise Figure vs Frequency Tc = 25 deg C, VDD = +8V 18 17 Gain (dB) 16 15 14 13 12 50 250 450 650 Frequency (MHz) 850 4 Noise Figure (dB) 3.5 3 2.5 2 1.5 1 15.8 15.75 Gain (dB) 15.7 15.65 15.6 15.55 4 5 6 7 Vdd (volts) 8 9 Gain and Noise Figure vs. Vdd Tc = 25 deg C, RF = 500 MHz 2.02 1.98 1.96 1.94 1.92 1.9 1.88 Noise Figure (dB) 2 GAIN NF GAIN NF IIP2,IIP3 vs. Vdd Tc = 25 deg C 40 37 34 31 28 25 22 19 16 30 27 24 21 18 15 12 9 6 26 25 24 Pin vs. Pout Tc = 25 deg C, VDD = +8V, RF = 500 MHz IIP2 (dBm) IP3 (dBm) 23 22 21 20 19 18 17 16 15 0 2 4 6 Pin (dBm) 8 10 12 4 5 6 Vdd (volts) 7 IIP3 8 9 IIP2 * Notes: IIP 2 Measured at 986.5 MHz, Input = two tones at 55.25 MHz and 931.25 MHz at - 10 dBm IIP 3 Measured with two tones at the input, RF = 986.5 MHz and 992.5 MHz at - 10 dBm INPUT IMPEDANCE START: 0.050 GHz STOP: 1.00 GHz 1: OUTPUT IMPEDANCE START: 0.050 GHz STOP: 1.00 GHz 1: 0.050 GHz 83.9 - 8.1 j 0.20 GHz 84.17 - 1.19 j 1 .5 2 5 5 0 -.2 .2 .5 32 54 6 0.050 GHz 79.76 - 4.79 j 0.20 GHz 77.88 - 13.21 j 1 .5 2 2: 2: 3: .2 1 .2 3: 0.40 GHz 70.02 - 21.83 j 0.6 GHz 59.63 - 26.56 j 0.8 GHz 49.91 - 26.56 j 1.0 GHz 41.77 - 25.15 j 5 5 1 0.40 GHz 85.38 - 2.27 j 0.6 GHz 87.64 - 3.82 j 0.8 GHz 90.20 - 6.60 j 1.0 GHz 93.57 - 11.76 j 4: 1 2 5 4: 0 -.2 .2 .5 1 6 2 5 -5 5: -5 5: -.5 -1 -2 6: -.5 -1 -2 6: Measured in 75 System Measured in 75 System 3 ADA10000S3C D C LE E H 0.015 [0.38]X45 L a A A2 A1 GAUGE PLANE 0.003 [0.076mm] SEATING PLANE e B1 B S Y M INCHES B O L MILLIMETERS MIN. MAX. NOTE NOTES: 1. CONTROLLING DIMENSION: INCHES 2. DIMENSION "D" DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH, PROTRUSIONS AND GATE BURRS SHALL NOT EXCEED 0.006 [0.15mm] PER SIDE. 3. DIMENSION "E" DOES NOT INCLUDE INTER-LEAD FLASH OR PROTRUSIONS. INTER-LEAD FLASH AND PROTRUSIONS SHALL NOT EXCEED 0.010 [0.25mm] PER SIDE. M IN. M AX. A A1 A2 B 0.058 0.004 0.055 0.013 0.062 0.008 0.380 0.150 0.068 0.010 0.065 0.020 0.070 0.010 0.400 0.160 1.47 0.10 1.40 0.33 1.58 0.20 9.66 3.81 1.73 0.25 1.65 0.50 1.78 0.25 10.16 4.06 4 2 3 B1 C D E e H L LE 4. LEAD THICKNESS AFTER PLATING TO BE 0.013 [0.33mm] MAXIMUM. 0.050 BSC 0.226 0.016 0.030 0 8 0.244 0.040 1.27 BSC 5.74 0.41 0.76 0 8 6.20 1.02 SPECIFICATION: SUBJECT: 98000-006 PUBLISHED OUTLINE, 16 LEAD BATWING SOIC PKG. a ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 Tel: (908) 668-5000 Fax: (908) 668-5132 http://www.anadigics.com Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The Advanced Product data sheets and product specifications contained in this data sheet are subject to change prior to a products formal introduction. The information in this data sheet has been carefully checked and is assumed to be reliable. However, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 4 |
Price & Availability of ADA10000S3C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |